Fingerprint | Card Access Control And Time Attendance Solutions : FingerTec Worldwide
 Change AD Picture
How To Change Ad Picture
Last Updated: Aug 23, 2013 10:23AM EDT
To change the AD picture on a time clock using a USB pen drive, please follow the following steps:

1- Adjust the picture size to 320x210 (less than 30kb)
The picture size must be set to 320 x 210 (which should be less than 30kb).

2- Rename the file to ad_1.jpg, ad_2.jpg, ad_3.jpg, ad_4.jpg, ad_5.jpg, ad_6.jpg, ad_7.jpg, ad_8.jpg or ad_9.jpg
The file name needs to be in this format so the picture can be uploaded. The file name consists of a title ( ad ), an underscore ( _ ), a number ( 1 ), and a file format ( .jpg ).

3- Save the file in the pen drive.
After making the changes, you will need to save the file(s) to a USB pen drive, so you can transfer the files to the time clock.

4- Plug pen drive to the terminal.
Connect the USB pen drive to the time clock to transfer the data from the USB to the time clock.

5- Press Menu > Pen Drive > Upload > Upload picture.
Press the Menu button to go into the main menu screen of the time clock, then navigate to "Pen Drive" and press the OK button. Then press OK on "Upload". Afterwards, you will have to press OK on "Upload picture" and it will upload all of the pictures with the specific file name.

6- Restart the clock.
Reboot the time clock by either holding down the power button or removing the power adapter from the time clock. Once the time clock has been rebooted, the pictures will be uploaded.